DEXA Scans Explained: Bone Density, Fracture Risk, and Body Composition

One quick, low-dose scan can show whether your bones are thinning before a break happens, and exactly how much of your body is fat, lean muscle, and bone.

By the Southern Pain Specialists team · Published and last updated

Ready to talk with us? Call (205) 995-9967 or request an appointment online.

What is a DEXA scan?

DEXA (also written DXA) stands for dual-energy X-ray absorptiometry. The scanner passes two low-dose X-ray beams over your body. Bone, fat, and lean tissue absorb those beams differently, so the machine can tell them apart and measure each one. You lie on a padded table while a scanner arm moves over you. It doesn't hurt, nothing is injected, and the radiation dose is very low. Mayo Clinic describes it as much less than a chest X-ray.

The same machine can answer two different questions:

  • Bone density: How strong are my bones, and how likely am I to break one?
  • Body composition: How much of my weight is fat, how much is lean muscle, and how much is bone, and where is it?

At Southern Pain Specialists we offer both in our Birmingham office. Learn more on our DEXA scan page.

Why is a DEXA bone density scan important?

Osteoporosis thins bones quietly, and most people feel nothing until something breaks. Health organizations say bone density testing can find bone loss early, estimate your chance of a future fracture, and confirm osteoporosis. It is also used to check whether treatment is working.

That timing is the whole point. A DEXA scan doesn't take a picture of a break. It shows that bones have become weak before a break happens, so you and your doctor can act on it. Fractures of the spine, hip, and wrist can change a person's independence. Finding weak bones early gives you a chance to protect them through exercise, nutrition, fall prevention, and medication when it's appropriate.

A DEXA scan also has limits. It can show that bone density is low, but it can't tell you why. Some spine conditions, such as arthritis, scoliosis, or past spine surgery, can make results less accurate. Your clinician may order other tests to look for the cause.

Who should get a bone density test?

Guidelines differ a little from group to group. Here's what two widely used ones say:

  • U.S. Preventive Services Task Force (2025): screen women 65 and older. Also screen postmenopausal women under 65 whose risk assessment shows they're at increased risk. The Task Force found the evidence insufficient to recommend for or against routine screening in men.
  • Bone Health & Osteoporosis Foundation: talk with your healthcare provider about a test if you're a woman 65 or older, a man 70 or older, or anyone who has broken a bone after age 50. The foundation also lists women 50 to 64 and men 50 to 69 who have risk factors.

Risk factors listed by these organizations include a family history of osteoporosis or fracture, frequent falls, smoking, heavy alcohol use, low vitamin D, and long-term use of certain medicines such as prednisone. Mayo Clinic adds that losing 1.5 inches or more of height can be a sign of small spine fractures. If any of these apply to you, ask about a bone density scan.

How do I read my T-score?

For postmenopausal women and men 50 and older, results are reported as a T-score. It compares your bone density with that of a healthy young adult.

  • -1.0 and above: normal bone density.
  • Between -1.0 and -2.5: low bone mass, also called osteopenia.
  • -2.5 and below: in the osteoporosis range.

You may also see a Z-score, which compares you with people of your own age and sex. Many reports also include a 10-year fracture-risk estimate called FRAX. The Bone Health & Osteoporosis Foundation notes that someone can be diagnosed with osteoporosis even with a better T-score, for example after a fragility fracture. That's why a physician should interpret the numbers alongside your history. At Southern Pain Specialists, a physician reviews your results with you.

Can a DEXA scan detect fractures?

A standard DEXA bone density scan is designed to measure bone strength and fracture risk. In other words, it finds weak bones before they break. It isn't the test used to diagnose a new injury. If you have sudden, severe back pain, especially after a fall or with height loss, you may have a vertebral compression fracture. That needs its own evaluation and imaging. Read our guide to kyphoplasty for compression fractures to learn how those breaks are treated.

What does a DEXA body composition scan show?

A body composition scan uses the same low-dose technology to measure three things across your whole body:

  • Fat mass and body fat percentage
  • Lean mass, which is mostly muscle
  • Bone mineral content

It also breaks results down by region: arms, legs, and trunk, and left side versus right side. That helps show where you're gaining or losing muscle and whether one side is lagging. Many reports also estimate fat stored around the organs, called visceral fat. Cleveland Clinic explains that visceral fat sits deep in the belly around organs, and that too much of it is linked to health problems. Standard bathroom scales can't measure it.

How does DEXA compare with BMI, smart scales, and calipers?

The CDC notes that BMI doesn't distinguish between fat, muscle, and bone. It also doesn't show where on the body you carry fat. The CDC describes DEXA as a method that "precisely measures body composition." That's why a muscular athlete can land in the "overweight" BMI range, and why someone with a "normal" BMI can still carry more fat than they realize.

Smart scales (bioelectrical impedance) and skinfold calipers estimate body fat. Their readings can swing with hydration, timing, and technique. DEXA measures fat, lean mass, and bone directly and consistently, so it's useful for tracking change over time. The International Society for Clinical Densitometry publishes official positions on how DXA body composition should be done and reported.

Why do athletes and bodybuilders use DEXA?

  • Bulk and cut tracking: see whether weight gained was muscle or fat, and whether a cut kept your lean mass.
  • Symmetry: regional numbers show left-right and upper-lower body imbalances.
  • Real numbers instead of mirror guesses: repeat scans on the same machine make progress easy to compare.
  • Bone health: the scan also reports bone mineral content, which matters for athletes in heavy training.

Many people rescan every few months, at the start and end of a training block, or before and after a cut. Ask the physician which interval makes sense for your goals.

How fast can I get a DEXA scan in Birmingham?

Waiting months for a scan at a large health system is common. Southern Pain Specialists is an independent practice with DEXA right in our office. We can often get you in for a DEXA the same day, depending on the schedule. Call (205) 995-9967 to check today's openings.

What does a DEXA scan cost, and do I need a referral?

  • DEXA body composition scan: $250 (self-pay), including interpretation by a physician.
  • Bone density scan: call (205) 995-9967 for current pricing.
  • Insurance: DEXA scans, including bone density scans, aren't always covered by insurance, so they're usually self-pay. Our posted self-pay price means you know the body composition cost up front.
  • No need to be a patient: non-patients, including athletes, gym clients, and bodybuilders, can book a DEXA scan directly.

How do I prepare for a DEXA scan?

Wear comfortable clothes without zippers, buttons, belts, or other metal, and expect to remove jewelry. Mayo Clinic advises skipping calcium supplements for 24 hours before a bone density test. Tell us if you've recently had a barium study or contrast for a CT or nuclear medicine scan, because those can interfere with results. Tell us if you might be pregnant, because X-ray tests are typically avoided during pregnancy. The scan itself is painless and usually takes about 10 to 20 minutes.

Sources

General medical information in this article draws on these public sources (links checked November 21, 2026). Prices and services describe Southern Pain Specialists only.

  1. U.S. Preventive Services Task Force: Osteoporosis to Prevent Fractures: Screening (2025)
  2. Bone Health & Osteoporosis Foundation: Evaluation of Bone Health/Bone Density Testing
  3. NIH NIAMS: Bone Mineral Density Tests: What the Numbers Mean
  4. NIH NIAMS: Osteoporosis
  5. Mayo Clinic: Bone density test (DXA/DEXA scan)
  6. MedlinePlus (NIH): Bone Density Scan
  7. Cleveland Clinic: DEXA (DXA) Scan: Bone Density Test
  8. RadiologyInfo.org (ACR/RSNA): Bone Densitometry (DEXA, DXA)
  9. CDC: About Body Mass Index (BMI)
  10. International Society for Clinical Densitometry: 2023 Official Positions (Adult), including Body Composition
  11. Cleveland Clinic: Visceral Fat

This article is general information, not medical advice. It does not replace an evaluation by a qualified clinician. Talk with your doctor about your own symptoms and treatment options. If you think you have a medical emergency, call 911.

Questions

Frequently asked questions

What is a DEXA scan used for?

A DEXA (DXA) scan measures bone density to look for osteoporosis and estimate the risk of a future fracture before a break happens. The same low-dose technology can also measure body composition: fat, lean muscle, and bone, by body region.

Can a DEXA scan detect fractures?

A standard DEXA bone density scan measures bone strength and fracture risk, which means it finds weak bones before they break. It is not the test used to diagnose a new injury. Sudden, severe back pain after a fall or with height loss needs its own evaluation for a possible compression fracture.

How soon can I get a DEXA scan at Southern Pain Specialists?

Southern Pain Specialists can often get people in for a DEXA scan the same day, so you don't have to wait months for an opening at a large health system. Availability depends on the schedule, so call (205) 995-9967 to check.

How much is a DEXA body composition scan in Birmingham?

At Southern Pain Specialists, a DEXA body composition scan is $250 (self-pay) and includes interpretation by a physician. Call (205) 995-9967 for bone density scan pricing.

Does insurance cover a DEXA scan?

Not always. DEXA scans, including bone density scans, are not always covered by insurance, so at Southern Pain Specialists they are usually self-pay. A DEXA body composition scan is $250 (self-pay) including physician interpretation; call (205) 995-9967 for bone density pricing.

Do I need a referral or need to be a patient to get a DEXA scan?

No. Non-patients, including athletes, gym clients, and bodybuilders, can book a DEXA scan directly at Southern Pain Specialists. Call (205) 995-9967 or request an appointment online.

What T-score means osteoporosis?

For postmenopausal women and men 50 and older, a T-score of -2.5 or below is in the osteoporosis range, between -1.0 and -2.5 is low bone mass (osteopenia), and -1.0 or above is normal. A physician should interpret results alongside your history.

Is DEXA more accurate than BMI or a smart scale?

The CDC notes that BMI does not distinguish fat, muscle, and bone and describes DEXA as a precise measure of body composition. Smart scales and calipers estimate body fat, and their readings can vary with hydration and technique.

This information is educational and not medical advice. Talk with Dr. Kenneth Varley about your symptoms and whether a treatment may be appropriate for you.

Get your DEXA scan, often the same day

In-office DEXA in Birmingham. Body composition is $250 (self-pay) and includes physician interpretation. Non-patients can book directly.